Dow Corning Sikasil Equivalent Silicone Sealant For Ss Production

$0.70 - $5.00
Min. Order
2000 Pieces
Company Information

Hunan MAGPOW Adhesive Group Co., Ltd.

CN Manufacturer, Trading Company
Response Time
Response Rate:
$ 7,000+
8 Years Paid Supplier Trade Assurance Gold Supplier Onsite Check
Learn More

Quick Details

Port: changsha
Payment Terms: L/C,T/T
Supply Ability: 1000 Carton/Cartons per Week
CAS No.: 7085-85-0
Other Names: Silicone Sealant
EINECS No.: 230-391-5
Place of Origin: Hunan China (Mainland)
Classification: Volatile Solvent Adhesives
Main Raw Material: Silicone
Usage: Construction,Fiber &amp; Garment,Footwear &amp; Leather,Packing,Transportation,Woodworking
Brand Name: MAGPOW
Model Number: MPB122
Type: dow corning equivalent silicone sealant
Color: transparent, blue, red, grey, black
Prolapse distance vertical: less than 3mm
Prolapse distance aclinic: no distortion
Density: 0.93-0.98
Extrusion: more than 400ml/min
Surface Dry Time: 5-15 min
Shore A(HSA): 20-30
Using temperature: -40 to 150 centigrade
Stock: Full and can accpet customer&#39;s brand and design
Item: sikasil equivalent silicone sealant
Delivery Detail: 5 days to 25 days
Packaging Detail: common export packing Specifiction:85+3g/set,12sets/inner,12inners/ctn Meas:67.3*42.8*30.9cm

Dow Corning Sikasil Equivalent Silicone Sealant For Ss Production

rtv silicone gasket maker

Item:MPB121  MPB122 MPB123




Main Component:
α, ω-Dyhydroxyl Methyl Silicone


Color: transparent, black, grey, blue, red.


Feature of sealant:
This product is one kind of sulfur silicone sealant with one acid component which could be applied at any climate and could take chemical reaction with the water in air rapidly. Good aging-resistant ability, high flexible, perfect performance of high or low temperature resistant. Several machine waster water resistant, good elastic.


Technical Feature:



Technical Parameter

Top grade

Common grade



Exquisite well-proportioned cream,no agglomeration, no gelling, no surface solidify, no bubble, hard dispersing


Prolapse Distance

Vertical , mm

≤ 3


No distortion






Extrusion , ml/min

≥ 400

≥ 400


Surface setting Time, mm




Shao's Hardness




2 3 Standard extend

≥ 0.4

≥ 0.4


Bonding destroy area under under standard condition %

≤ 5

≤ 10


Elastic recover rate%

≥ 80

≥ 80


Extend bond rate under standard condition

100% no damage

100%no damage


Setting time mm/24h




Oil-Leakage rate

≤ 2



applying temperature

-40~ 15 0

-40~ 120


Scope of application:
This product is used for sealing of car, gear case of motor, fore-and-art board, water pump , plane flange, cover board of other machine equipment.

Using Method:
1.Cleaning up the surface with the cotton fabric, guarantees the surface not to have the dust, the greasy dirt, the rusty stain and so on.
2.In order to obtain good outward appearance, paste the temporary protection adhesive tape , near the place to be pasted after clean the surface, pull out after paste glue.
3. Pierce the seal with the cap, cover the mouth, cut bevel the tube mouth.
4. Spread the sealant evenly on the place which need to be sealed or bonded. The operation should be continuously, guarantee the sealant continuously squeeze out at cylinder shape, move the glue mouth evenly and slowly, prevent the form of bubble or hole is move too fast.
5.The sealant form shape at approximately 10 minutes, when assembly maintains the gasket thickness, fold gathers the curing at normal temperature 24 hours.


1. This product will release a few acetic acid in the solidification process, the working conditions should maintain ventilate.
2. Do not put within kids reach, non-toxic after solidifies completely, avoid eye contact before solidification, if touches the eye carelessly, use massive water to wash, if serious go to see a doctor.
3. When operation, must hold the glue steadily, cannot separate, guards against mixes in the air and form bubble , affects the seal effect.
4.After operation, take off the cap mouth immediately, close the packing cover tightly to prevent the moisture enter and cause solidification. Wipe off the glue left at glue mouth.
5.This product should be operated at temperature 5-40,relative humidity 40-80%

Storage and packing:
1. This product is non-flammable,seal store in 10-27 centigrade cool dry place.

2. The shelf life for top grade acetic gasket maker s 12 months from date of production.

3. Packing 45g/pc,85g/pc,85pc+3g promotion in tube.

 dow corning equivalent silicone sealantsikasil equivalent silicone sealantsilicone sealant for ss productionDow Corning Sikasil Equivalent Silicone Sealant For Ss Production


dow corning equivalent silicone sealantsikasil equivalent silicone sealantsilicone sealant for ss productionDow Corning Sikasil Equivalent Silicone Sealant For Ss Productiondow corning equivalent silicone sealantdow corning equivalent silicone sealant

For more information please refer to our Website

We'll offer our sale agents and purchasers many kinds of services and benefits.

Dow Corning Sikasil Equivalent Silicone Sealant For Ss Production
1.dow corning equivalent silicone sealant     2.sikasil equivalent silicone sealant   3.silicone sealant for ss production