|Port:||Guangzhou / Shenzhen / Foshan|
|Supply Ability:||30000 Piece/Pieces per Month|
|CAS No.:||ilicone sealant|
|Other Names:||Silicone Rubber|
|EINECS No.:||ilicone sealant|
|Place of Origin:||Guangdong China (Mainland)|
|Main Raw Material:||Silicone|
|Usage:||consumer electronics ,led|
|Packaging Detail:||Plastic cartridge, cartridge,300ml/pc,2600ml/pc,5gallon/barrel|
Two Parts Potting Compound Metal To Metal Silicone Sealant
potting compound for LED display
HM-315 potting adhesive
HM-315 is two parts condensation silicone sealant, we can add the third part and make it mat. It’s cure at room temperature, release ethanol element while curing, no corrosion to PC,PP,ABS,PVC,copper,etc.With excellent adhesion to many electronical material(except PP,PE).
1.Low viscosity, good leveling, suitable to used as potting adhesive for complex electronical fitting.
2. After cure, it becomes soft silicone rubber, can resist strong impact.
3.Can resist high temperature and extreme weather condition, extend lifespan of electronical fittings.
4. Condensed type,no corrosion to electronical fittings while cure.
5. Do not require coat, has excellent adhesion to PC and Epoxy.
6. Anti-humidity, water-proof.Use this product as potting adhesive for LED screen, can reach water-proof IP68 level.
7. Excellent mat effect, especially suitable for occasion which requires mat effect.
Potting adhesive for LED
Before mixed (25C,65%RH)
After mixed (25C,65%RH)
A:B:C = 100:10:1
Viscosity after mixed (CP)
Working time (min)
Complete cure (h)
After cure 7 d,25C,65%RH
hardness ( Shore A )
Ultimate tensile strength (Kgf/cm2)
Alongation at break ( % )
Dielectric constant (1.2MHz)
Before applying, mixed A and B at ratio 10:1 (Volume or weight ratio)after two components are complete mixed, use vacuum pump to release the bubble, be careful the whole volume of adhesive should not more than one third of the container, in case overflow. We can also let the adhesive stay still for about 20-30 minutes to naturally release the bubble at 25C.
Potting and cure
Pour the mixed adhesive into the potting site as soon as possible in case of any air sneak into the adhesive. At room temperature, the adhesive could be cure into elastomer,low temperature could extend the cure time, by adjusting the mixed ratio can change the cure time.
1.This adhesive condense to cure with ratio 10:1 for part A and part B completely mixed. If require shorter or longer cure time which can be reach via adjusting ratio of both components.Normally,we don’t suggest heating, which can result in generating small bubble or pinhole, which have bad effect on appearance and sealing.
2.We suggest that potting thickness should not more than 50mm,normally thickness of 20mm,can release the bubble by staying still for a while. If require thick potting area, should at least put this mixed adhesive into vacuum container and at 700mmHg for at least 5 minutes.
3. Completely mix two components
4.If require mat effect,pls add the C component, and only after 24-48h of potting, the mat effect comes out.Relatively,higher temperature can accelerate the mat effect, but keep in mind, should be lower than 50C.
5. Color depends on customer’s requirement.
We suggest that customers should test this product before application and see if it could meet the demand.
Store under 30C and stay sealed
Shelf life of component A and B is 12 months after the date of manufacture.
1. What are the normal package ?
100 ml /300 ml /2600 ml /18.9 L for one part silicone sealant
1 kg /tin for heat sink compound
20 kg / barrel for two parts potting compound
2. Normal application temperature ?
Normally it's -50C - +180C ,depends on specific item .
3. Does your silicone sealant corrode metal and plastic ?
No, it doesn't .All of our silicone sealant are neutral .
4. What kind of silicone sealant are you selling ?
We are selling neutral silicone sealant for LED ,automobile ,Solar PV ,consumer electronics ,craft ,etc
5. Are your silicone sealant Eco-friendly ?
All of our silicone sealants are Eco-friendly ,they have gone through RoHS, REACH tests every year .Some have UL certificates .
6.What is the Shelf life of your silicone sealant
When stay unopened, shelf life is six months from the date of manufacture, keep in cool and dry place (-20℃~27℃).
1. We have been in silicone sealant industry for more than 10 years
2. We have supplied our silicone sealant to many famous brands in and out of China ,which include Philips India ,Videocon ,Midea ,Galanz ,Nationstar ,FOXCONN ,etc .
3.Haoming provide comprehensive range of electronic silicone sealant ,which are widly used in LED ,Solar PV ,automobile ,consumer electronics ,etc .
4. We have a professional R&D team ,products have stable quality .