New products sip panel
outer layer:Mgo board
inner layer: Polystyrene, EPS material
EPS: good insulation materials
The size and thickness could be made according to customized.
White,Red, Blue, etc.
Sound insulation and keep warm
Fireproof: A grade non-combustible mgo board and flame retardant-grade EPS
Green and environment protection
Easy to construct, save the cost of installation.
Common size: 900*2100, 600*2100mm
1) Largest width: 1200mm, adviced 900mm
2) Length: 2400mm, 2700mm, 3000mm, 3600mm, option is available
4)Mgo board thickness:3-20mm
5)EPS Density: 15-25KG/M3
Customized size can be accepted.
|Polyurethane||The main advantage of polyurethane (or the much harder to pronounce derivation, polyisicyanurate) is that it has the highest R-value of any SIP panel. After what's called thermal drift, it's about 6 to 6.8 of R-value per inch of panel.||The main detractor of urethane panels is the high cost. The other disadvantage in terms of construction is that polyurethane has a high melting point, hot wire burners (the primary method of modifying EPS and XPS panels on site) can't be used.|
|EPS||Over 80% of the SIP panels installed are EPS. EPS core material is widely available. It is easy to modify on sight and most sip installers have experience dealing with EPS. It's also the least expensive option in terms of material cost.|| |
|XPS||XPS has many of the best characteristics of both polyurethane and EPS. It has a high R-value (5 R-value per inch of panel). It is dense and stable yet has a relatively low melting point so on-site modifications are as easy as EPS. Also, like EPS, it bonds easily to OSB and gypsum board.||Unfortunately XPS is expensive and manufactured panels are not widely available|
a. A finished product, can be used directly, no need to compound.
b. Lower the cost and time of construction.
c. Superior fireproof wallboard.
d. Good performance of sound insulation and keep warm.
e. Green and environment protection.
f. Easy to construct and combine discretionarily.