|Payment Terms:||T/T,Western Union|
|Supply Ability:||100 Set/Sets per Year|
|Place of Origin:||Shanghai China|
|Applicable Industries:||Food Shop|
|After-sales Service Provided:||Video technical support,Free spare parts|
|Packaging Detail:||Wooden case packing filling into 20FT 40FT 20OT 40OT container shipping by sea.|
Test Device for 3000L/hr Waste water treatment RO system
1. Sea water treatment RO System introduction
SW (Sea Water) 3-8040 series is applicable to Hyde company developed in offshore and onshore installation of reverse osmosis membrane element. It has the characteristics of high pressure resistance (up to 6.9Mpa), low operating cost, good salt removal performance, stable desalting effect and so on. Drinking water can be obtained from seawater under the condition of high recovery.
2. SW3-8040 series membrane elements are suitable for various industrial water treatment such as seawater desalination, high concentration brackish water desalination, power plant boiler make-up water and so on. It can also be used for various fields such as wastewater reuse, food and medicine, high value-added substances and so on.
Main uses: sea water desalination, high concentration bitter salt water desalination, industrial water treatment, wastewater reuse.
3. Technology Parameter
The water yield in the table is average, and the water yield error of the single membrane element is within 15%.
The test conditions are not the best use conditions. Please consult the technical staff of our company.
The membrane element is equipped with a pressure vessel with a nominal diameter of 8 inches.
Prior to the start of the RO system, the system pre - processing and debugging, the filling of the membrane components, the instrument calibration and the other system testing should be completed.
The influent of the membrane element should be gradually boosted, and the time to rise to the normal running state should be less than 60 seconds.
The new film installation of low pressure flush for more than two hours, RO water discharged.
Pay attention to avoid backpressure on the water side of the product.
The membrane components all are rigorously tested before leaving the factory, and the special protection liquid Hyde company for storage processing, vacuum packaging, packaging for cardboard boxes.
It is forbidden to add any chemical influence on membrane elements in the storage and operation guide, technical manuals, design of access to the latest version of Hyde to the company, or to the membrane technology expert consultation.
The customer does not according to the standard operation process, Hyde company will not bear all the consequences arising therefrom.
As a result of technical improvement and product updating, product information may change at any time without prior declaration. Please pay attention to the new product information haideneng.
5. RO System for sea water Pictures
Port of loading: Shanghai port /Ningbo Port