|Payment Terms:||L/C,D/A,D/P,T/T,Western Union,MoneyGram|
|Supply Ability:||10000 Set/Sets per Month|
|Circulation Type:||Indirect / Closed Loop (Active)|
|Housing Material:||Stainless Steel|
|Certification:||CE,SOLAR KEYMARK EN12976|
|Place of Origin:||Zhejiang China|
|Brand Name:||LUCKY SOLAR or OEM|
|Product name:||Integrated Pressurized Bearing Solar Water Heater|
|Solar collector:||Heat Pipe Vacuum Tubes 58/1800mm|
|Heat Pipe:||Anti-freezing>-35 Degree|
|Tube Material:||Borosilicate Three Target Tubes|
|Frame material:||Aluminum/SUS304 Stainless Steel|
|Product Keywords:||Pressurized Solar Vacuum Tube Solar Water Heater|
|Packaging Detail:||Standard expoting carton packing, carton packing for container Sample with plywood box packing for vacuum tubes|
Integrated presurized bearing solar water heater Heat Pipe solar hot water boiler
LUCKY SOLAR has developed a water heater which combines heat pipe solar collector and storage tank into one product. The condenser of the heat pipe tube is directly inserted into the non-corroding copper protection tube within the water tank. The heat pipe evacuated tube collect heat with high efficiency transforming of the incoming solar irradiation into heat. The condenser transfers the generated heat to the manifold where the water is heated. Thereafter, the hot water is circulating in the system until the system attains the required temperature.
WATER STORAGE TANK SPECIFICATION
Material of out tank
High quality colour coated steel.
Material of inner tank
Food grade SUS304-2B Stainless Steel –1.2mm thickness.
Tank insulating layer
Imported polyurethane,57.5mm thickness can conserve the heat for maximum 72 hours
Argon arc welding
Water tank preformed hole
Magnesium bar, T/P valve, sensor hole, water inlet & outlet hole, drainage.
EVACUATED VACUUM TUBES SPECIFICATION
All-glass double-tube co-axial structure
High borosilicate 3.3 glass
Outer tube diameter and glass thickness
Ø58±0.7mm; Glass thickness 1.6±0.15mm
Inner tube diameter and glass thickness
Ø47±0.7mm; Glass thickness 1.6±0.15mm
Absorptive coating property
Three targets magnetron sputtering plating
Solar irradiation for obtaining a preset water temperature
Idle sunning property parameters
Average heat loss coefficient
HEAT PIPES SPECIFICATION
Heat pipe material
Heat pipe condenser size
Top: Ø14mm*70 mm, Body: Ø8mm
Complete (SINGLE) al-alloy fins, 1.63meters.(the best)
Start-up Temperature of heat pipe
Strong Galvanized steel,1.5mm thickness.
We have 0 25,38,45 structure for selection, sloping roof bracket cheaper a little bit
Made of zinc-coated stainless steel.
Integrated heat pipe pressure solar water heater CE Advantages:
1) Adopts the best conduction performance metal- heat pipe (copper).
2) Start up quickly, heat pipe transfer the heat energy into the storage tank in one direction
3) No water inside the evacuated tubes, the solar water heater can still in service even with several tubes breakage
4) Can be used all year round in the cold climate
Integrated heat pipe pressure water heater CE features:
1. The inner tank adopts the 1.2mm imported SUS304 Stainless steel and automatic welding techology which decrease the corrosion.
2. Inlet and outlet use the argon welding technology against the 0.6Mpa pressure.Heat tube conducts the heat energy in the single direction and has some advantages of quick operation, high heat efficiency and anti-corrosion.
3. It has advantages of no water in tube, no filthy, no brocken tube, anti-freeze, unlimited time of the inputting water and pressure operation.
4. Insulation adopts the polyurethane which has good insulation efficiency.
5. The frame adopts the imported stainless steel, which is strong and against the corrosion.
6. Tail stock has novel design and available to be insatlled.
Integrated Pressure Bearing System –JXIP-Serial Data Sheet
Solar Vacuum Tube
Loading Qty sets
Φ58 X 1800
Φ58 X 1800
Φ58 X 1800
Φ58 X 1800
Φ58 X 1800
Working principle: the vacuum tube absorb the solar ray and conduct the heat to heat-pipe (inside) by the aluminum slice, because the heat-pipe is connected with the copper connector which in the water tank, so there exists heat exchanging between the heat- pipe and copper connector, when the heat exchanging goes on, the water in the tank will be heated and become hot water.
Cold Water Inlet
Electric Heater Element Hole
Hot Water Outlet
Vacuum Relief Valve
Haining Jixiang Solar Energy Co.,Ltd(Lucky) is a new high-tech company specializing in developing and utilizing of solar energy, Locating in Haining city, we are specialized in the research and application of solar energy and manufacture of all kinds of solar water heaters, eco-friendly oven and integrative ceiling and PVC panels ect.
Our ability : 5000pcs/month.
China factory supplier.
1.We have 10 years solar export experience.
2.We offer different materials from different regions experience.
3.We accept the custom-made according to your specification.
4.We provide design drawing and installation training for our clients.
5.Our vacuum tubes are guaranteed for 10 years and the main body for 5 years.
6.1% of the total tubes are available as spare tube, even there are some tubes broken during the shipping, it doesn’t affect your sale, including accessories.
Why choose us?
1.Complete International Certificates: CE, Solar KEYMARK, TUV, SRCC, SGS, ISO, FSEC, ONNCCE, GMC, ALIBABA etc.
2.The first grade product quality: All passed EN12975(12976)-1,2, the heat efficiency of Solar Keymark certificate is 0.73209 in the top of China. Very rarely factory can pass EN12976 in China.
3.We are full export experience 10 years, over 60 countries in the world.
4.Own the best group of R&D, the best quality and the best service for customers.
5.Lucky Solar is a well-known & reputable brand in China, registered 18 countries brand trademark
6.OEM/ODM is available.