|Place of Origin:||Guangdong China|
|Working Voltage:||9-16V, 9-32V|
|Working Temperature:||-40--+105 degree Celsius|
|Start Current:||<6A & 12V|
|Open circuit protection:||yes|
|Over voltage protection:||yes|
|Selling Units:||Single item|
|Single package size:||15.5X11.5X5 cm|
|Single gross weight:||0.79 KG|
|Package Type:||Standard Cartons|
Technology Advanced hid xenon slim ballast kit xenon hid kit accessory
1)Scope of application
This specification only suitable for 12V35W ballast made by NEW VIEW.
2)Standard test conditions
2 - 1 Environment
Environment temperature: 23 - 27℃
Relative humidity: 60 - 70%
2 - 2 Test load
HID Lamp voltage: 68 - 102V
2 - 3 Power supply
30VDC Adjustable regulated voltage supply, Output current>10A
3) Profile drawing
3 - 1 Dimensions: see attached drawing.
4) Rated parameters
4 - 1 Rated voltage: 13.5V
4 - 2 Output power: 32W - 38W
4 - 3 Input regulated current: 3.2A
4 - 4 Output voltage: 68 - 102V
5) Other parameters
5 - 1 Input voltage: 9 - 16V
5 - 2 Max.input.current: <5A
5 - 3 Instant start voltage: >23KV
5 - 4 Steady time:<60 sec.
5 - 5 Output voltage waveform: square wave
5 - 6 Frequency: - 20 - 500Hz
5 - 7 Output open circuit protection: <1 sec.
5 - 8 Output short circuit protection: <1 sec.
5 - 9 Input reverse connection protection: <1 sec.
5 - 10 Insulation grade: B
5 - 11 Working temperature: - 30℃ - 105℃
5 - 12 Working life: >2000 hrs.
5 - 13 Lead strength: Input line could bear 5KGS of pulling force, the AMP connectors could bear 4KGS of pulling force. In testing, the electric wire not broken off and terminal not pulled off.
6) Testing method
|Testing items||Testing methods||Testing standard|
Measure the dimension of ballast, length of
Fulfill requirements on
appearance and measurements.
|2||Lower voltage start-up|
When the input voltage is 9 - 10V, the lamp
can be lighted up
|9 - 10V|
|3||Low voltage character|
When the voltage decreased into 7.5 - 8.5V,
the ballast stop work
|7.5 - 8.5V|
When the input voltage is 13.5V, the steady
current is 3.0 - 3.4A
|3.0 - 3.2A|
|5||Cold Start Current|
With regular lamp voltage, input the 13.5
VDC voltage when cold start, the current would
not higher than 5A
|Input 13.5V, Current<5A|
|6||Open circuit protection|
When ballast in open circuit state, input the
13.5VDC voltage, the ballast stops work within
1 sec., and enter automotive protection
Enter automotive protection
within 1 sec.
|7||Short circuit protection|
When output end in short circuit state, input
the 13.5VDC voltage, the ballast stops work
within 1 sec., and enter automotive protection
Enter automotive protection
within 1 sec.
|8||High voltage start-up|
Input the 16VDC voltage, then light on the
|Bulb lighted on normally|
When the input voltage raised from 13.5VDC
to 18VDC, the ballast would stop work
immediately, and enter automotive
|17 - 19V|
|10||ON - OFF testing|
With regular lamp voltage, input 13.5VDC
voltage, ON - OFF operation twice in 1 sec,
and repeat by five times
|The bulb ON and OFF normally|
Check if there is short circuit between case
and positive and negative input
|No short circuit|
|12||Constant power character|
When input voltage between 10V15V, the
bulb power is 32W - 38W
|32W - 38W(Input voltage :10 - 15V)|
|Mark: 1. All above testing under room temperature, and adjudged according to the testing standard.|
1.Super slim shape with special digital circuit, flat transformer structure
2.Low radiation would not interfere the driving computer and electric appliances of the car.
3.Light weight, low temperature rise
4.Easy to transport and install, suitable for small auto which with small installation space.
5.High reliability, defective rate<1%, efficacy>83%
6.Compatible with different bulb types, fast dynamic response
Guangzhou New View Electrical & Lighting Co., Ltd. was established in 2000. Our headquarters is located in Xiamen City, which has won a good reputation of the warmest city in China. Our company specializes in developing and marketing lighting systems and electronic products of automobiles, including HID bulbs, HID ballasts and HID kits.
2.Why choose us
E-MARK certificate: contact us if you need the whole test report