$83.24 - $217.61
Min. Order : 1 Piece

Three phase bidirectional smart meter 80A M-bus Made in Italy MID Energy Meter

Get Latest Price

Quick Details

Port: exworks
Payment Terms: L/C,T/T
Operating Temperature: -25°C ... +55°C
Measuring Energy Range: 3x230/400 ... 3x240/415 V
Place of Origin: Italy
Phase: Three Phase
Connection: Direct, up to 80A
Dimensions: 4 DIN rail modules,4 DIN rail
Accuracy Class: Energia attiva classe B secondo EN 50470-3
Model Number: UEM80-D M
Brand Name: Algodue
Accuracy: Class 1
Display Type: Digital Only
Wires: 3 and 4 wires, 3phase
Frequency: 50/60 Hz
Application: Submetering or Billing
Certificate: MID
Operating temperature: -25°C ... +55°C
Display: LCD with 7 main digits
Communication: M-Bus on-board
Packaging Detail: Each device is packed in a single carton box.
ALGODUE ELETTRONICA S.R.L.
Gold Supplier
IT
Manufacturer
100%
Response Rate
-
On-time delivery rate
-
-
Transactions
Visit Store
Product Description

 UEM80-D M, 80A three phase energy meter with built-in communication

• Direct connection up to 80 A

• Fully bi-directional 4-quadrant measurements for all energies and powers

• For 4 wire networks with balanced or unbalanced load. M-BUS model can be used also for 3 / 4 wire networks

• Class B according to EN 50470-3 (MID)

• 8 MB for data recording and automatic/manual data transferring (only ETHERNET model)

• S0 output for energy pulse emission

• Available with MID certification

 

 

4 DIN modules energy meter for the energy measurement in industrial and civilian application, with the following built-in communication, according to the model: RS485 Modbus RTU/ASCII, M-Bus or Ethernet Modbus TCP. Available with MID certification suitable for billing. Besides the energy, the meter can measure the main electrical parameters and makes them available on the built-in COM port. The LCD display shows the energies and the instantaneous powers. The COM port allows to manage the connected meter by a remote station. Data is transmitted on a RS485, M-Bus or Ethernet line according to the device model. Moreover, a dedicated application for remote management is provided: • Modbus Master software > for energy meter management by PC in RS485 Modbus or Ethernet network. • M-Bus Master software > for energy meter management by PC in M-Bus network. • Web server > built-in interface for energy meter management by PC in Ethernet network. Moreover, it allows to enable a data recording and a manual or automatic data transferring. In case of automatic transferring, data is sent to a remote server at the set time schedule. The meter is built according to EN 50470-1 standard. The active energy is compliant to IEC/EN 62053-21 class 1, but for MID certified device it moreover fulfills class B requirements according to EN 50470-3. The accuracy of reactive energy is compliant to IEC/EN 62053-23 class 2. Wide backlighted LCD display with clear graphic symbols comprehensible at a glance. Metrological LED on front panel and sealable terminal covers. The analysis of the MTBF values, the accurate selection of components and the reduction of the internal working temperatures together with strict production and control standards guarantee a product with an excellent quality and a long lasting reliability

 

Packaging & Shipping

 

Each device is packed in a single carton box.

 

 

RELATED PRODUCTS

RELATED PRODUCTS.jpg 

Company Information

 

www.algodue.com

Our company was founded in 1986 and today, thirty years later, and after a generational change, we are specialists in the design, manufacture and customization of systems for the measurement and monitoring of electricity, divided into the following categories:

 

Network Analyzerss for Energy Control and Quality

MID Certified Energy Meters

Rogowski Coils certificate UL

Class A power quality analyzer

 

 

Our products are entirely designed and made in Italy in our factory in Maggiora, 50 km from Milan.

 

All our products are adapted, customized and developed according to specific project or market requirements.

 

OUR STRENGTHS:

  • High Technical & Industrial Know How
  • High productivity due to rapid and adapted to handle large volumes supply chain
  • Multilingual technical and commercial contact persons (ITA, ENG, D, ESP, FR)

 

 

OUR VISION:

Be globally recognized specialists in the design, development and manufacture of electronic and mechanical products for the measurement and monitoring of power quality.

 

OUR MISSION:

  • Move towards constant company improvement and the continuous overcoming of the obtained results.
  • Actively involve the entire business team giving the opportunity to develop their potential.
  • Research, develop and maintain successful business relationships with customers, suppliers and partnersMaintain a constant focus and attention to the needs of each customer/partner.

 

 

OUR STAFF:

R&D department: the idea

Production department: the solution

Marketing and export department: the contact

Sales: the support

Administration: the control

Management: continuity

FAQ

 

PURCHASE TERMS

» GENERAL INFORMATION

Only our purchasing conditions will be applied. Without prior written authorization no general conditions of the supplier will be accepted.
Our conditions of purchase will also be valid for all future transactions with the supplier.



» CONTRACT

Orders, contracts and delivery orders and any amendments and supplements must be defined in writing. Orders and delivery orders may be sent by fax or email.
Any verbal agreement defined before or during the conclusion of the contract will be valid only if confirmed in writing to Purchasing Department.
Unless expressly agreed the estimates are considered binding.
In case of non-acceptance by the supplier within two weeks of receipt, our Company may cancel the order. The delivery orders become binding if not contested by the supplier within 3 working days from receipt.



» DELIVERY

Deliveries notwithstanding our contracts and our orders will be accepted only with our prior written consent.
Dates and deadlines agreed upon are binding. For compliance with the date of delivery or of the deadline, the date of receipt of goods in our Company will prevail. If the agreed dates are not met provisions of the law will be applied.
In case of problems related to the production, procurement of raw material, compliance with the date of delivery or similar circumstances which could affect the timely delivery or quality agreed upon, the supplier must immediately give written notice to our Purchasing Department.
Partial deliveries will not be accepted unless they are expressly permitted or considered acceptable by our Company.



» PRICES

Unless otherwise agreed the prices are intended as DDP, including packing and exclusive of VAT. The supplier is responsible for the goods until the time of acceptance of such goods from our Company.



» RIGHTS FOR DEFECTS AND RESERVE

The acceptance is subject to verification of the absence of defects on the object of the contract and in particular for checking the accuracy, integrity and suitability.
Our company can verify the object of the contract to the extent that this results possible under conditions of routine. In the presence of defects we will immediately send a relative claim.
The supplier withdraws to protest any claim submitted late.
In any case it is our right to choose how to overcome defects. If in presence of the requirements of Article .439, paragraph 2 BGB, the supplier has the right to refuse the procedure chosen by us to overcome the defects.
If the supplier does not provide for the elimination of defects immediately after our call to eliminate defects, our Company may, in urgent cases and to avoid serious risks of substantial damage, provide for the elimination of defects directly or through a third party. The limitation of the rights deriving from the vices of the sipplied object is 2 years.
The limitation of rights arising from defects in the goods shall start on the date of delivery of the object of contract.
In the case of a withdrawal of our products manufactured and / or sold, due to defective item provided by the supplier, or if, after such a circumstance, there was a deduction of the sales price or is advanced any type of claim against us, our Company reserves the right to ask for compensation against the supplier, without having to set a deadline.



» PRODUCT NORM

For the ordered goods and / or products used for the services ordered shall refer to the following laws and regulations: RoHS, REACH, and ESD.
The safety datasheets of the goods ordered by us or the materials used for ordered services which are prescribed by the law or are available anyway by the supplier, must be forwarded to our Company.



» TOOLINGS

Our Company reserves the right to own the toolings and the supplier may only use them for the production that we ordered. à¬
The supplier undertakes to ensure at its own expense the toolings owned by us for the new value with an insurance policy covering the risk of fire, flood and theft.
The supplier is required to perform at his own expense and in good time any maintenance and inspection where necessary.
Any faults must be reported promptly by the supplier. In case of culpable omission, we reserve all rights to claim refunds.



» DOCUMENTATION AND CONFIDENTIALITY

All the technical or business information that will be sent by us will be kept secret to third parties and also the holding of the supplier will be made available only to staff members who must necessarily deal the supply to our Company.
Such staff members will in turn be bound by confidentiality obligations.
All this documents will remain our exclusive property. Without our prior written consent such material can not be duplicated or used for commercial purposes, except for deliveries provided to us. Upon our request, all information provided by us and the objects we granted on loan must be returned immediately and completely or in the case destroyed. We reserve all rights on this material.
The products made according to the documentation we realized, such as drawings, models, or according to our confidential information with our equipment or copied, can not be used directly by the supplier or offered or provided to third parties.



» GENERAL RULES, JURISDICTION AND APPLICABLE LAW

The jurisdiction for all disputes arising directly or indirectly from the contractual relationship based on these general conditions of purchase will be the one of MILAN.
For contractual relations the Italian law will be applied exclusively.
Our Services

CUSTOMISATION

 

 on request we can also offer an Enhanced brand labelling