|Supply Ability:||500000 Set/Sets per Month|
|Transmitter Color:||White and Gray|
|Place of Origin:||Guangdong China|
|Transmitter:||Radio Remote Control|
|Fan Speed Adjustment:||capacitance Adjustment|
|Working distance:||≥10 m (360°)|
|name:||ceiling fan with remote|
|Frequency:||433.92MHz or 315Mhz|
|Application:||Ceiling Fan and Light|
|Packaging Detail:||Ceiling fan with remote will put in bubble pack/Blister Package|
ACL: Connected to the hot wire of power supply
ACN: Connected to the neutral wire of power supply
Light: Connected to the lights
Motor: Connected to the fan
COM: Connected to the neutral wire of the fan and/or lights
Antenna: No connection
Warning: Please make sure power is turned off before starting installation!
Once properly wired, the AS-CF239L receiver can be installed into the canopy of the ceiling fan, as shown in Fig. 4.
Fig. 4 AS-CF239L Receiver Installation
Setup and Operation Guide:
Fig. 5 shows the side of the receiver and the back of the remote control unit. Before operating ceiling fan and
lights, please complete the following two procedures:
a. There is a dip switch on the side of the receiverand there is a dip switch on the back of the remote
control unit. Set these two dip switches to identical positions. The remote control unit will be able to
send commands to the receiver and read the status from the receiver
b. The remote control unit uses one 23A 12V battery. Please open the sliding cover and install the battery.
c. Turn on the power supply to the ceiling fan and lights. If there is another switch to control the fan
speed and the lights, please set the switch to the highest fan speed and turn on the lights.
Fig. 5 Set up AS-CF239L
Now, it is ready to control the ceiling fan and lights using the remote control unit.
1. Turn on fan: The remote control unit has three buttons LOW, MID, and HI. Pressing each of these three
buttons will turn on the fan and set the fan to low speed, medium speed and high speed respectively. The fan
indicator on the LCD display will be on, the fan speed indicator will show different height corresponding to the fan
speed, and the fan speed display shows the current fan speed: 0 (off), 1 (low), 2 (medium), or 3 (high).
2. Turn off fan: Pressing the FAN/Off button will turn off the fan.
3. Turn on or turn off light: Pressing the LIGHT On/Off button will turn on or turn off the lights. When the
light is on, the displayed light indicator is on.
4. Set up timer: When the fan is on, pressing the TIMER button will select four timer hours 1 hour, 2 hours,
4 hours, and 8 hours respectively. Other customized timer hours can be made available at factory.
When the timer is activated, the timer indicator is on and the timer starts countdown. The fan will be turned off once
the countdown timer runs out time.
AS-CF239L ceiling fan remote control kit good is for all kind of ceiling fans, even for retrofitting an older ceiling fan.
It can bring convenience and ease to our daily life and work.
They have wide applications at various locations such as homes, restaurants, conference rooms, theatres, etc.