|Operating Temperature:||-15C to 60C|
|Place of Origin:||Guangdong China|
|Packaging Detail:||standard package|
|Selling Units:||Single item|
|Single package size:||3X4X5 cm|
|Single gross weight:||0.1 KG|
Taidacent Long Distance 433MHZ RF Relay Switch Universal DC12V 10A 1CH Wireless Distance Remote Control Switch
1.Input Voltage: DC10-14V
2.Standby Current: <5MA
3.RF Frequency: 315MHZ
4.RF Working mode:Super heterodyne receiver
5.Receiver Sensitivity: >90dBm
6.Remote Control Distance: >100 meter(In open environment)
7.Decoding Way: MCU Software decoding
8.Can store the number of remote control:50
9.Support remote control type: Fixed code, learning code
11.Multiple working modes: (Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched,Delay off)
12.Wiring Method:Fixed wiring terminal
13.Working Voltage: DC12V
14.Output Current: 10A
15.Rated load:10A 250VAC / 10A 125VAC
10A 30VDC / 10A 28VDC
16.Output:Normally open,Common,Normally closed
1.Jog/Non-Latched: Press one button is Working /ON. Loosen your finger on the same button is Stop/OFF. One channel switch need one buttons remote control.
2.Self -lock/Self-Latched: Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control.
3.Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control.
4.Delay: Press remote control ‘s one button,relay is working,release the remote control and begin timekeeping,after 5s/10s/15s will automatically close the relay
1. press the learning code .the indicator flash ,loosen your finger ,press any button of the remote control (press 1 times to learn Momentary;2times-Toggle;3times-Latched;4times-5s delay;5times-10s delay;6times-15s delay)
the indicator flash 2 times and off .it mean you learn it successfully .
2. it can learn 2272 2262 or 1527 chip with the different code wireless 315MHz remote control
Reset new operating mode
Press the white learning button on the top of the control panel, LED lights, and then press any button on the remote control set to ‘Jog’ button, the control panel LED lights flashing, indicating that the setup is complete
Press the white learning button on the top of the control panel, LED lights, and then press any button on the remote control to set to ‘self-locking’ button, the control panel LED lights flashing,
Press the white learning button on the control panel, the LED lights, and then press any button on the remote control set to ‘start’ button, the control panel LED lights flashing, press another button to set to ‘stop’ button LED Blinking means the setting is complete
press the learning button about 8 seconds , the indicator turn on to off, it means the information that you keep have been removed successfully .
|Warranty & Contact US|
1. You have 7 days to contact us and 30 days to return it from the date it was received.
2. Both Replacement and Money Return are accept. Return shipping fee afford with buyer.
3. 12 months Manufacturer's limited warranty for defective items(excluding Man-made damage).Accessories come with a 3-month warranty.
4. Defective item MUST BE reported and returned within the warranty period.
5.We maintain high standards of excellence and strive for 100% customer satisfaction. Feedback is very important,We hope you can contact us immediately before you give us neutral or negative feedback.
6.If you have any questions, our Customer Service staffs welcome you to email or call us. We strive to answer all questions and resolve any problems as quickly as possible