|Place of Origin:||Guangdong China|
|Carcase Material:||Stainless Steel|
|Project Solution Capability:||graphic design|
|After-sale Service:||Online technical support|
|Packaging Detail:||Wooden frame and carton|
|Selling Units:||Single item|
|Single package size:||118X24X88 cm|
|Single gross weight:||27.0 KG|
Q:Can I have it made to order
A:Hello, dear, it can be made to order. What size do you want to order?Customized production period about 30 days, the price is quoted separately.The longest size of a single product is not more than 1.6m, the height is not more than 1m, and the longest door plate of a single mirror is not more than 0.5m.When ark of this bathroom mirror is installed, both sides should leave the wall to leave above of 1 centimeter gap each, ability does not affect to open the door.But first tell you clearly, custom-made do not support the return of oh, because the second sales, the quality will give you guarantee.
Q:Why do custom designs take longer and cost more than regular ones?
A:Because the time it takes to order one bathroom mirror cabinet is equal to the time it takes us to mass produce 10 conventional models.
And customized, cutting, bending, mold should be readjusted, waste more bits and pieces, loss is relatively large, so the time is slightly longer, the price is relatively high conventional.
Q:How much is the thickness of mirror ark
A:The total thickness of the stainless steel mirror cabinet is about 13cm, including the cabinet door, the thickness of the individual door plate is 2cm, and the width of the inner laminate is 11cm.
The back plate is about 0.4mm thick, single layer, mainly moisture-proof and waterproof.
Q:What is the mirror made of
A:Mirror, epoxy lacquer mirror.
4mm thick, no formaldehyde and no radiation.
The image is clear and bright without distortion.
Water mill edges and corners, do not cut hands, not easy to black, not rust.
Q:What is the cabinet body of bathroom mirror ark material?
A:The whole cabinet material is brushed stainless steel, environmental protection, no paint, no formaldehyde, no odor, waterproof and moisture-proof, no rust, no mildew, the surface through special processing, no fingerprints, no dust.
The partition board, side plate, bottom plate and door panel are double-thickened, up to 18mm thick, very strong and durable!
Q:What matters should we pay attention to after receiving goods?
A:Unpacking inspection, the ground must be padded with paper or foam, do not directly put the cabinet on the ceramic tile floor, because the mirror hardness is high, and the ground ceramic tile hard, easy to break.
(carton foam must be kept for more than seven days).
Thank you for your cooperation!
Q:What's the package for the bathroom mirror cabinet
A:About the packing: the outer cartons are nailed with wooden frames, and the inside of the cartons is covered with foam to protect the cabinets, and there are pearl cotton corner guards.
Professional packaging, very little damage, there are often customers to transfer overseas no problem, please rest assured!
Q:How to install the bathroom mirror cabinet
A:Installation steps of mirror cabinet:
Prepare tools: electric drill, small hammer, ruler, screwdriver, level ruler (if you don't have one, you can use a wire to hang a nail, first draw a vertical line)
Step 1: Measure and mark on the wall according to the screw hole at the back of the mirror cabinet.
The second step is to use an electric drill with a 10mm bit to drill holes (4 holes) in the wall, about 7cm deep.
Step three, use a small hammer to screw the glue into the hole.
The fourth step, one person carries the mirror cabinet, aligning the screw hole, another person screws the screw (first set the decorative cover inner cover, black part), screw in.
Step 5, finally cover the silver part of the decorative lid.
Q:What should I pay attention to before installation
A:Measurement and purchase: both sides of the mirror cabinet are away from the wall, and the gap of about 1cm should be left above each side, so that the door will not be affected. So please pay attention to the measurement and purchase of the mirror cabinet!
Note: leave two (positive/negative) wires on the upper right side of the wall where you want to install the mirror cabinet, about 2 meters above the ground.
Lens face does not take the common bathroom mirror ark of switch, a switch is left in bathroom door edge control.
ARK of intelligent bathroom mirror can not install switch, leave a wire to go.
Our ordinary bathroom mirror cabinet with lights is not equipped with a switch by default. We should ask the installer to leave the switch in advance. If the socket is left, we should also match a line with a plug.