Newly created in 16 years, the use of silicate powder to replace all kinds of additives, effectively increase the cons truction area, reduce loss, increase fullness, and restore the texture of real stone.
What is no resistance? Even when spraying at low pressure (0.5 pounds) without adding water, the material can be evenly and evenly distributed on the wall
Wanlei stone paint eliminates the following problems
Wanlei Natural Stone Paint
Spraying at low air pressure (0.5 lbs) is evenly distributed, high hiding power, and the material does not need to be polished
Ordinary Natural Stone Paint
It sprays out in the form of "lumps" and "dots" with uneven covering power. High-pressure jet has a lot of rebound and large loss The amount of water added is too large, which is easy to cause penetration and prolong the construction time
Pure acrylic emulsion
The noble in the emulsion-pure acrylic emulsion, the use of pure acrylic emulsion can guarantee 10-15 years of weather resistance, no yellowing, no discoloration, and very stable.
Styrene acrylic emulsion
Use ordinary styrene-acrylic emulsion. After 2-3 years, it is easy to turn yellow and become soft and sticky under the sun and rain environment. In severe cases, it may fall off.
Can spray 10-12 square
Only spray 6-8 square
The secret weapon of non-resistance real stone paint-silicate activated soil, which completely replaces all kinds of additives, effectively reduces the shrinkage ratio of the material, improves the hiding power, and uses the
Competitive products containing various additives have a large shrinkage ratio coefficient and poor overall fullness after drying. After all kinds of additives such as cellulose are dried and volatilized, it is easy to leave depressions in the wall, causing dust and penetration.
Combining silicate with high silicon content and organic emulsion film-forming material, the formula can reach a hardness of 2H after scientific proportioning, effectively preventing collision and cracking.
Only using emulsion as the main film-forming substance, after applying the protective topcoat, the solvent dissolves the emulsion in the real stone paint, and the surface becomes soft and sticky, and the surface can even be removed by hand.
A drop of water is clearly visible. The hydrophobic sixth-gener ation real stone paint formula can effectively reduce water seepage on the wall, prevent dust from hanging, and keep the wall clean.
Water quickly penetrates into the wall, easy to mold, replacement, etc.
.Special hydrophobic formula, stains will fall off quickly and will not penetrate
Sewage seeps into the interior and is difficult to clean
Causes of whitening of natural stone Paint
1.The base problem 1. The putty layer has not been maintained by water; 2. No sealing primer is applied; 3. Construct when the putty layer is not dry
2. Material quality issues 1. The sand is uneven in thickness and its hiding power is very poor; 2. Too high additive content or improper use, poor water resistance, and easy to cause water white; 3. Ordinary emulsion has poor weather resistance and is easy to age and turn yellow.
3. Construction issues Add too much water, trying to cut corners