Ready to Ship
Fast dispatch
In stock
Min. Order : 1 Piece
10-49 Pieces
50-99 Pieces
>=100 Pieces

intelligent 6a engine Generator battery charger

Note: Please be cautious and check with your supplier if this product is for virus protection purposes and if the coronavirus (COVID-19) will affect your order.
Trade Assurance
Built-in order protection service in
Product quality
On-time shipment
More on shipping and other trade services.

Quick Details

Warranty: 3months-1year
Place of Origin: Jiangsu China
Size: 143mm*96mm*55mm
Output Current: DC5A
Product Name: Generator charger 24V
Model Number: BAC06A-12V(24V)
Certification: CE/CCC
Weight: 0.65kg
Brand Name: BeleHem
Brand: BeleHem
Packing: Carton
Voltage: AC (95~280)V
Working Temperature: (-30~+55)°C
Frequency: 50HZ/60HZ
Power Consumption: MAX. 3W
Selling Units: Single item
Single package size: 18X10X6 cm
Single gross weight: 0.65 KG
Wuxi Elijah Electronic Technology Co., Ltd.
Gold Supplier
Manufacturer, Trading Company
Response Rate
On-time delivery rate
Visit Store

intelligent battery charger 6a
BAC06A series switching battery charger adopts the latest switch power components, which is designed for charging lead-acid starting battery according to its property. The charger is suitable for lead-acid battery float charge. The maximum charge current for 12V charger is 6A; the maximum charge current for 24V charger is 3A.

1) Designed in switching power structure, wide range of AC voltage input, small volume, light weight and high efficiency;
2) Two-stage charging method (constant current firstly and then constant voltage), fully considering charging property of the lead-acid battery, can avoid overcharging and extent extend the battery life to the fullest;
3) With short circuit and reverse connection protection;
4) Charging voltage and current can be adjusted via potentiometer on the spot;
5) LED display: Power indication and charging indication;
6) Horizontal type for installation of BAV06A, easy to install.

 Product parameters

Input Characteristi csNominal AC VoltageAC (95~280)V
Max. AC VoltageAC (90~305)V
AC Frequency50Hz/60Hz
Max. Input Current2A
Max. Efficiency85%
Output Characteristi csCharging Current4A~6A,(Error±2%)2A~3A,(Error±2%)
Factory Charging Current6A3A
Max. Power85W
Min. Voltage7.5V
No-load Voltage13.8V, (Error ±1%)27.6V, (Error ±1%)
No-load power consumption<3W
InsulationInsulation ResistanceBetween input and output, input and shell both are: DC500V 1min RL≥500MΩ I
Insulation VoltageBetween input and output, input and shell both are: AC1500V 50Hz 1min Leakage current: IL≤3.5mA.
Working ConditionsWorking Temperature(-30~+55)°C
Storage Temperature(-40~+85)°C
Working Humidity20%RH~93%RH (No condensation)
Dimension143mm×96mm×55mm (Length*Width*Height)

intelligent battery charger 6a

According to charging property of the lead-acid battery, BAC06V battery charger uses 2-stage charging method and charge mode is "constant-current". When battery voltage is under the threshold, it is charging in constant-current mode; when the battery voltage is higher than the threshold,the chargingcurrent is decreasing as the battery voltage is rising until it reaches the set voltage, and then charge mode is turned into "floating charge". Charge current is gradually reducing and battery voltage is rising up to the set value. When charging current is lower than 0.3A, the battery is basically fully charged (charging indicator eliminates). Afterwards, charging current will offset self-discharge of the battery. Thus the charger can maintain a full charged condition and extend the battery life.


When adjusting the voltage on the spot, disconnect the battery from the charger, and then measurethe output voltage of the charger while adjusting voltage potentiometer (VOLT) to a proper value.
Connect battery output firstly. When battery voltage is under 25.0V (12.5V), adjust the current
potentiometer (AMP) and set proper charge current. Output current can also be estimated according to the current potentiometer, which is recommended.
Output terminal of battery charger short circuit or battery reverse connection may blow the charger output fuse. In that case, after connecting AC power supply, charger green LED lights up but output terminal without voltage outputting, and then remove the output fuse tube to visually observe whether fuse is blown or not, if condition permit, multimeter can be used to measure the fuse status.
a) If output terminal 10A fuse is blown, users only need to change the same capacityfuse.
b) If output fuse isn’t blown or battery without outputting after changing the fuse, battery needs to depot repair.
c) Fuse burn emergency method: using conductive metal wire short connected burnt fuse, and then change the fuse later.
intelligent battery charger 6a




Company Information
intelligent battery charger 6a
Our Advantages
intelligent battery charger 6a






If the quantity of order is not very big,we could send them to you by express delivery,such as TNT,DHL,UPS OR EMS etc.

If order is big ,we will advise you use Air Shipping or Sea Shipping through your nominated forwarder agent.Our long-term cooperated agent also available.



intelligent battery charger 6a

intelligent battery charger 6a

Packaging & Shipping

intelligent battery charger 6a




Fast Delivery

Different amount of time will be required for different


Is our company a trade company or factory?


We are a factory, we mainly produce generator set controllers, battery chargers, water temperature heaters, speed control boards, and AVRs. Our price is absolutely advantageous, stable quality and convenient after-sales.


I have a large factory, can the price be discounted?


If you are a factory, you want more goods. Our price also has an absolute advantage, because we are a factory.


Warranty issues


Our normal warranty is one year, if you are our long-term stable customer, we will provide a permanent warranty.

intelligent battery charger 6a

Delivery time


We are a factory, basically all from stock.