SPRAY SET UP FEATURES
Each series is abaliable with a pressure spray set-up or siphon spray set-up
each set-up provides a specific spray pattern with a specific capacity ans spray coverage range performance.
spray set-ups are interchangeable for each nozzle series
round spray:extended full cone round spray pattern
wide angle round spray :hollow cone-type,wide angle round spray pattern
360circular spray :hollow cone-type 360 circular spray pattern
flat spray:extended flat or sheet-type s[ray pattern
deflected flat spray :extended flat or sheet-type spray diverted awat from the axis of the inlet connection
each spray set-up consists of an air cap and fluid cap
Internal Mix Features
liquid and air are mixed internally to produce a completely atomized spray .
liquid and gas streams are not independent and a change in air flow will affect the liquid flow
internal miz uses pressure set -ups and is abailable with the following spray patterns :
360 circular spray deflected flat spray , elliptical spray , flat spray , round spray, wide angle round spray
External mix features
liquid and air streams are mixed outside of the nozzle
air and liquid flow can be controlled independently
effective for higher viscosity liquids and abrasive suspensions
external mix can use siphon set-ups or pressure set-ups
when a siphon set-up is used a round spray pattern is produced
when a pressure set0up is used, a flat spray pattern is produced
Structure Diagram of Air Atomizing Nozzle
Air atomizing nozzle Set-UP:
Siphon Gravity-Fed Air Atomizing Nozzle Head
Siphon Gravity-Fed Air Atomizing nozzle Head is a nozzle head that can be installed on various kinds of air atomizing nozzles. It could produce a round or flat fan pattern spraying effect according to the nozzle head (also called air cap) shape.
When using siphon or gravity-fed fluid system, it can be supplied to the fluid by siphon or gravity-fed. In these devices, the fluid is absorbed and sent to the gas stream through conveyor where it is atomized in the gas stream.
Flat Pressure Air Atomizing Nozzle Head
Flat Pressure Air Atomizing nozzle Head is a nozzle head that can be installed on various kinds of air atomizing nozzles. It could produce a fan-shaped spraying pattern by using this nozzle head (also called air cap) shape.
With the external mixing, the air pressure can be changed to control atomizing without changing the liquid flow rate. As the picture shown, size ‘A’ is the flow width of fan-shaped spraying, ‘D’ is the total distance from the nozzle body to the maximum dispersing area.
Fitting for air atomizing nozzle (6 mm tube or 8 mm tube ):
Air Atomizing Nozzle options :
FACTORY VIEW AND CERTIFICATION