|Payment Terms:||L/C,T/T,Western Union|
|Supply Ability:||30 Set/Sets per Month|
|Place of Origin:||China|
|Material:||Galvanized tube,Galvanized tube|
|Water temperature:||Cold water|
|Name:||Automatic car washing machine|
|Water absorption height:||30 (cm)|
|Applicable vehicle load:||below 100T|
|Packaging Detail:||Nude pacakage by container|
Meituo automatic car washing machine is designed according to the tires and chassis of various engineering vehicles. This equipment uses multi-directional high-pressure water guns to carry out high-pressure washing of the tires and chassis parts. It is suitable for cleaning vehicles in various construction sites, quarry, cement factory, coal quarry, electricity factory, waste landfills, communities and other places.
Features of roller washing machine:
A total of up to 400 nozzles can be cleaned in all directions;
Fast cleaning speed, 40-80 vehicles/hour;
The clean water of the Mituto roller washing machine can be recycled to save water;
The car washing machine of Meituo Project is split type, which can be disassembled and installed in blocks and can be transferred at any time.
The transportation and installation are simple and can be put into use within one hour;
Completely solve the pollution of urban roads by construction vehicles;
Adopt special suction sewage pump, strong suction to avoid blockage;
Meituo engineering car wash machines are professionally rust-proof and durable.
The control system is divided into electronic automatic induction type and manual type, which is convenient to operate.
The wheel washer has two modes: automatic operation and manual operation: turn the 3P circuit breaker in the wheel washer control box to the ON position, the work indicator lights, and the system starts to enter the standby state.
Flushing operation: The vehicle slowly passes through the chassis of the turbine washing machine at a speed of 3km/hour. The sensor senses that the water pump starts after the vehicle, and the working water flows through the nozzles on both sides of the nozzle and the nozzle holes of the chassis to the front, rear, left, right, and bottom of the body Carry out multi-directional automatic washing. About 40s (time adjustable from 0-60s), the pump stops automatically and the flushing is completed.
Water temperature: cold water
Moving method: fixed base
Injection pressure: 3.5 (MPa)
Range: 3 (m)
Water volume: 30L
Water absorption height: 30 (cm)
Uses: construction site
Applicable vehicle load: below 100T
Material: Galvanized tube
Custom processing: Yes