Dongguan City King Rose Electric Appliance Co., Ltd.
On-time delivery rate
Best quality professional hair clipper and cordless hair trimmer
PBT+ Stainless Steel Blades
Cut hair for your own style
Product performance description
1: Verify that the machine switch is off, and then connect
the plug charger;
2-Light load indicator;
3: After fully loaded LED is deleted and for loading;
4: Once the machine is fully loaded it will be ready to use;
5: Loading 90 to 120 minutes, Downloading 150 to 180 minutes;
To assemble, adjust the lever
adjusting upward , fit in
the smaller blade in plastic support and align
the largest conforming blade.
The distance between the Blades must be between
0,5 to 1,0 mm , maintaining the Blades
parallel and centralized.
The Barber has lateral lever for adjusting cutting height even without the combs. This adjustment can be made even with the appliance on. Up lever Minimum adjustment height. Low lever Height of maximum adjustment.
4 combs (3mm, 6mm, 9mm, 12mm)
sNote: For cutting with combs, the lever shall be positioned upward
Product usage introduction
1. Position Key (I/0) to Position I (Fig.3 C)
2. Make sure the cutting machine is clean, lubricated
and functioning without strange noises.
3. Check the conditions and make a careful analysis
the state and height of the hair.
4. Depending on the height of the desired cut, select the
comb that will be used for cutting and positioning
the upward lever (Fig.3 -A) and insert the comb
5. With the machine running and with the
desired setting carefully slide the blade
with or without comb, following the outline of the head,
until it reaches the desired cut.
Description of product use effect
Before cleaning your Barber Extreme,
make sure the key (I/0) is in position
0 and disconnect the plug charger if it is
Release the two screws from the set of blades (fig.5)
and clean up the Blades according to the same
product cleaning guidelines.
King Rose Electric Appliance Co. Ltd is a factory located Zhangmutou Yufeng Industrial zone, It is very convenience to Shenzhen just needs about 20mins. We are specialized on personal and household devices design and manufacture. The company has successfully passed the ISO9001 quality system. Our products have met UL,CSA,GS,CE,CB,CETL,SAA,INMETRO and other international requirements. King Rose dedicated to meet our customer needs in order to serve their consumers better and therefore to create a better future for our customers.
Q1: Can I have a sample and what about the lead time. A: Yes, we welcome the sample order to test and check quality. Mixed samples are acceptable. The samples need one week. Q2: Do you offer guarantee for the products? A: We offer 1 years warranty to our products. Q3: What kind of ways you factory deliver the goods to customers? A: Normally, we ship the goods by Sea, and air shipment is available.