It is suitable for the rapid quantitative weighing and packaging of various granules, flakes, strips, balls and powders such as candy, chocolate, nuts, nuts, potato chips, frozen food, cereal grains, pet food, plastic pellets, etc. .
2. The bag forming machine and vibration motor greatly reduce the adhesion of the powder and make the seal stronger;
3. The sealing part adopts two-way push, the bag sealing is more reliable and beautiful;
4. Wide range of use,suitable for quantitative bag making and packing of multiple materials;
±0.2g (depending on the product)
2-50g (depending on the product)
Bag making width
Support customization of various specifications, as shown in the table below
Roll film width（cm）
Finished bag width（cm）
The roll film is formed by folding the sealer on the machine, so a machine can only use a width of roll film, but the length can be adjusted (3-15cm), according to the number of materials corresponding to the length. (Can be customized, please contact us).
Product structure display
Packing parameter settings
First column Preset weight setting
Press the "Add" and "minus" keys to change the preset weight value such as 07.0 for 7 grams
Second column weight column
After pressing start, the machine starts to quantify, the second column will automatically display the actual weight of the material in the weighing hopper, this column does not need to be adjusted.
Third column quantity column
After unloading, the quantity column will automatically accumulate +1 to show how many packages are packed and unpacked, this column does not need to be adjusted.
Note: If the actual weight column value in the second column does not return to zero after starting up, first press the "Discharge" button, then press the "Reset" button and then press Start. After pressing start, you cannot press reset again!
Bag making parameter setting
Upper temperature setting:
Press the temperature "Add" and the temperature is flashing, then press the temperature "Add-Minus" key to adjust.
Lower temperature setting:
Press the temperature "Minus" when the temperature is flashing, then press the temperature "Add-Minus" key to adjust.
Press the "Add or Minus" key under the length to directly adjust the number in the length bar.
1. After adjusting one temperature, wait for two seconds, and adjust another temperature when the number does not flash.
2. After the upper and lower temperatures reach the preset temperature, the machine will start to pull the bag and make bags.
3. At the beginning, the value should be set a little larger to prevent the bag from getting too small to catch the material, and then reduce the value appropriately according to the remaining space of the bag.
Circuit board isolation protection
Quantitative packaging control board has an exclusive protective cover to greatly reduce the contact between dust and circuit board and increase the service life.
The sealing part is cut by two-way push heating sealing, the bag sealing is more firm and beautiful
Press block safety shield
1. It can prevent children from being pressed into
2. Simple and safe disassembly, more convenient inspection and operation
3. No need to remove screws to replace the roll filmNote: Please cover the protective cover when working to ensure safety
Packing & Service
Outside packing with wooden case,inside packing with film.
We usually need 25 days about it.
1.Make packing solution according your requirements.
2.Welcome to vist our factory and dicuss face to face about packing solution and testing machines.
1.Installing and Training services:
We will train your engineer to install our machine. Your engineer can come to our factory or we dispatch our engineer
to your company.
2.Trouble shooting service:
Some times if you can not fix the problem in your country, our engineer will go there if you need us to support.Of
course, you need to afford the round trip flight ticket and accommodation fee.
3.Spare Parts replacement:
For machine in guarantee period, if spare part are broken, we will send you the new parts free and we will pay the express fee.
Q:Can your machine meet our needs well, how to choose the packing machines ?
Dear sir,Please kindly response questions of machines before inquiry:
1.What's product to pack and size?
2.What is the target weight per bag?(gram/bag)
3.What's bag type,Please show photos for reference if possible?
4.What's bag width and bag length?(WXL)
5.The speed is required?(bags/min)
6.The room size for putting machines
7.The power of your country(Voltage/frequency)
Q:How long of the warranty period?
Whole machine 1year. In warranty period, We will send the part free to replace the one that is broken
Q:What’s the Payment terms?
Our payment is T/T and L/C.40% is paid by T/T as deposit.60% is paid before shipment.
Q:Can you provide oversea service?
We will dispatch engineer to install the machine if you need, buyer should afford the cost in buyer's country
and round-trip air tickets. The compensation for engineer is 100USD/DAY.
Q:Do you also offer the wrapping film?
Yes, we can offer you the plastic roll film, we have a long term cooperated supplier for roll film and the price is favorable.
Q:How can I trust you for the first time business ?
Please note our above business license and certificate. And if you don't trust us, then we can use Alibaba Trade Assurance
service. it will protect your money during the whole stage of transaction.