Min. Order : 1 Lot
Each Lot 4000 Pieces

RLP25FEER220 High Power Current sensing metal chip alloy resistor 1% 0.22 ohm 2512 2W 0.22R

Note: Please be cautious and check with your supplier if this product is for virus protection purposes and if the coronavirus (COVID-19) will affect your order.
Trade Assurance
Built-in order protection service in alibaba.com
Product quality
On-time shipment
More on shipping and other trade services.

Quick Details

Operating Temperature: 5℃~35℃
Place of Origin: TAIWAN
Height - Seated (Max): 0.7MM
Resistance Tolerance: 1%
Size / Dimension: 6.4X3.2MM
Temperature Coefficient: 75PPM
Model Number: RLP25FEER220
Resistance: 0.22 OHMS
Package Type: Surface Mount
Supplier Type: Original manufacturer
Power (Watts): 2
Package / Case: 2512/6432
Technology: Metal Alloy
Resistance (Ohms): 0.22R
Media Available: Photo
Rated Power: 2W
Packaging Detail: BOX
Selling Units: Multiple of 4,000
Package size per batch: 20X20X2 cm
Gross weight per batch: 0.38 KG
Shenzhen King Joining Tech Co., Ltd.
Gold Supplier
Manufacturer, Trading Company, Distributor/Wholesaler
Response Time
On-time delivery rate
US$ 110,000+
Visit Store


Product picture

 RLP25FEER220  High Power Current sensing metal chip alloy resistor 1% 0.22 ohm 2512 2W 0.22R

RLP25FEER100 0.1 ohm
RLP25FEER200 0.2 ohm
RLP25FEER220 0.22 ohm
RLP25FEER270 0.27 ohm
RLP25FEER300 0.3 ohm
RLP25FEER330 0.33 ohm
RLP25FEER500 0.5 ohm

RLP25FEER010 0.01 ohm
RLP25FEER012 0.012 ohm
RLP25FEER015 0.015 ohm
RLP25FEER018 0.018 ohm
RLP25FEER020 0.020 ohm
RLP25FEER022 0.022 ohm
RLP25FEER025 0.025 ohm
RLP25FEER030 0.03 ohm
RLP25FEER033 0.033 ohm
RLP25FEER040 0.04 ohm
RLP25FEER050 0.05 ohm
RLP25FEER060 0.06 ohm
RLP25FEER070 0.07 ohm
RLP25FEER075 0.075 ohm
RLP25FEER080 0.08 ohm
RLP25FEER090 0.09 ohm

Overcurrent detection: Overcurrent refers to the current exceeding the rated current. Loop currents greater than the rated current of the loop conductor are all overcurrents. It includes overload current and short circuit current. The difference is that the overcurrent before the circuit insulation is damaged is called overload current; the overcurrent after the insulation damage is called short circuit current.

Current control: DC/DC converters, etc. detect the peak value of the sawtooth current flowing through the reactor and use it for control In addition, in order to drive the three-phase motor to rotate, the phase and time of the current must be correctly controlled. Therefore, the current passing through each phase is detected and fed back to the control circuit. Commonly used in EPS (electric power steering) and air conditioning.

Current management: By detecting the charging and discharging current of the battery equipped with the device in real time, grasp the remaining capacity of the battery and optimize the operation of the power supply circuit.






Our company


Contact us