|Standard or Nonstandard:||Standard|
|Temperature:||-60 to +230|
|Place of Origin:||Guangdong China|
|pressure:||0 to 40 Mpa|
|Model Number:||JIS, AS,BS,etc|
|speed:||less than 15 m/s|
|hardness:||25A to 80A|
|performance:||excellent heat resistance|
|application:||reciprocating motion and static seal|
|size:||standard and non-standard|
|Packaging Detail:||Normal packing ways, inner packing is plastic bag and outer packing is carton box, also according to your requirements|
|Selling Units:||Single item|
|Single package size:||20X20X10 cm|
|Single gross weight:||0.05 KG|
Silicone rubber sealing O-ring
Accept custom colors
Standard or nonstandard
water, oil, dust, air.
For general type Viton the service temperature is better limited to approximately from -26 C to 232 C in static applications, though the service temperature can arrive to 275 C at short time In dynamic applications, it is suitable between -15 C and 200 C.
Because FKM has excellent resistance of high temperature, oil, solvent, flame, chemicals and weathering, it is usually applied in automotive, chemical processing, aerospace and many other industries.
For Silicones the service temperatures are from -60 C to 225 C. Some special types can be used in extreme temperature up to 300 C and down to -100 C.
Silicone rubber performs well under environmental and temperature extremes. It is usually applied in automotive and aerospace industries where flexibility and longevity are important. It is also a suitable material for parts that need food grade for food handling equipment and appliances.
PU displays higher mechanical strength, high abrasion, wear and extrusion resistance, high pressure load capacity, as well as a high tear and elongation at break resistance.
PU is suitablefor for application in mineral oils and greases, hydraulic oils, silicone oils and greases, highly non-flammable hydraulic fluids HFA and HFB and water uo to 50℃.
PTFE's mechanical properties are low compared to other plastics, but its properties remain at a useful level over a wide temperature range of -100°F to +400°F (-73°C to 204°C).
PTFE is the common sealing material used for making wear ring, backing-up ring, o ring, gasket, etc. It can be found in metallurgy machinery, petrochemical machinery, engineering machinery, and light industrial machinery.
For EPDM the service temperature can be designed from -55 C to 125 C or up to 150 C (for peroxide cured systems).
In phosphate-ester based hydraulic fluids and glycol based brake fluids systems Ethylene Propylene Rubber is good choice for sealing parts. EPDM is also is usually used in hot water or steam applications up to 150 C.