|Place of Origin:||Zhejiang China|
|Product Name:||E27 Lampholder|
|Power Source:||110-240V/AC 50/60HZ|
|Rated Load:||Max.60W (E27)|
|Time Delay:||10sec±3sec to 5min±1min(adjustable)|
|Ambient Light:||<5-15 Lux|
|Built-in timer:||1,2,4,8,12 hours|
|Application fields:||Hallway, Entrance, Aisle, Kitchen, Storage, Stairs,ect|
|Selling Units:||Single item|
|Single package size:||27X23.5X26 cm|
|Single gross weight:||1.5 KG|
|Package Type:||Packing:each unit in a color box, 50pcs in a carton Carton size:33x32x27.5 N.W./G.W.(kgs):4.5/5.4 1x20'ft (pcs):48209|
Welcome to use ST451B Infrared motion sensor!
Portable Fancy Auto Mini ST451 E27 Bulb Holder Infrared Motion Sensor Holder Ceiling lamp Holder
The product is a new saving-energy sensor; it adopts good sensitivity detector and integrated circuit. It gathers automatism, convenience, safety, saving-energy and practical functions. It utilizes the infrared energy from human as control-signal source and it can start the load at once when one enters detection field. It can identify day and night automatically. It is easy to install and used widely.
Detection Range: 360° Ambient Light: <3-2000LUX (adjustable)
Power Source: 110-240V/AC Rated Load: Max.60W (E27)(Iincandescent lamp)+(energy-saving lamp)
Power Frequency: 50/60Hz Detection Distance: 6m max (<24℃)
Time Delay: Min. 10sec±3sec Installation Height: 2-3.5m
Lifetime and warranty:
26000-45000 at least
Ø Fix the holder in the place where you will want to install according to figure on the right.
Ø After installation of the sensor, connect with lamp and then you could test it.
Ø After installation, Turned LUX knob clockwise to the maximum (SUN). Turned time knob anti-clockwise to the minimum (-).
Ø Switch on the power .The sensor and its connected lamp will have no signal at the beginning. After Warm-up 30sec, the sensor can start work .If the sensor receives the induction signal, the lamp will turn on. While there is no another induction signal any more, the load should stop working within 10sec±3sec and the lamp would turn off..
Ø Turn LUX knob anti-clockwise on the minimum (moon). If the ambient light is more than 3LUX, the sensor would not work and the lamp stop working too. If the ambient light is less than 3LUX (darkness), the sensor would work. Under no induction signal condition, the sensor should stop working within 10sec±3sec.
Note: when testing in daylight, please turn LUX knob to (SUN) position, otherwise the sensor lamp could not work!
Our company adopts automatic machines, such as: SMD, auto component inserter, wave solder, auto injection machines,the daily output is up to 20000-30000 pcs.
The concept of our company is"advocating new modern living environment",which focuses on researching and developing the contemporary household intelligent product.Our product can be truly satisfied for different customer's requirement,most of them are available with CE GS ROHS R&TTE REACH certification.